Nissan Sentra: the short answer
The Nissan Sentra runs a 5×114.3 mm (5×4.5″) wheel bolt pattern — 5 studs on a 114.3 mm pitch circle. To swap wheels you need that same pattern plus a compatible center bore and offset.
Wheel fitment
Nissan Sentra bolt pattern
The Nissan Sentra bolt pattern is 5×114.3 mm (5×4.5″).
Nissan Sentra
5x114.35 lugs · 114.3 mm · 4.5″ PCD
| Years | Bolt pattern | In inches |
|---|---|---|
| 2007–present | 5x114.3 | 5×4.5″ |
Before you buy wheels
A matching bolt pattern is the first filter, not a green light. Check the hub center bore and the offset/backspacing, and make sure there's brake-caliper clearance. Confirm everything on the door-jamb sticker or manual.
Reference value for the Nissan Sentra; verify against your owner's manual.
FAQ
What is the Nissan Sentra bolt pattern?
The Nissan Sentra uses a 5×114.3 mm (5×4.5″) bolt pattern. That's 5 lugs on a 114.3 mm (4.5″) pitch circle. Confirm against your door-jamb sticker before buying wheels.
Will wheels from another vehicle fit my Sentra?
Vehicles like the Acura Integra, Acura RDX, Acura TLX share the 5x114.3 pattern, so their wheels are worth checking — but the bolt pattern is only the first match. You still need a compatible center bore and offset, so confirm those before buying.
What does 5x114.3 mean in inches?
5x114.3 is the same as 5×4.5″ — 114.3 mm converts to 4.5 inches.
The Nissan Sentra bolt pattern shown is a well-documented reference value. Confirm your exact bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying wheels. A shared bolt pattern does not by itself guarantee a wheel will fit.