Hyundai Elantra: the short answer
The Hyundai Elantra runs a 5×114.3 mm (5×4.5″) wheel bolt pattern — 5 studs on a 114.3 mm pitch circle. To swap wheels you need that same pattern plus a compatible center bore and offset.
Wheel fitment
Hyundai Elantra bolt pattern
The Hyundai Elantra bolt pattern is 5×114.3 mm (5×4.5″).
Hyundai Elantra
5x114.35 lugs · 114.3 mm · 4.5″ PCD
| Years | Bolt pattern | In inches |
|---|---|---|
| 2011–present | 5x114.3 | 5×4.5″ |
Before you buy wheels
A matching bolt pattern is the first filter, not a green light. Check the hub center bore and the offset/backspacing, and make sure there's brake-caliper clearance. Confirm everything on the door-jamb sticker or manual.
Reference value for the Hyundai Elantra; verify against your owner's manual.
FAQ
What is the Hyundai Elantra bolt pattern?
The Hyundai Elantra uses a 5×114.3 mm (5×4.5″) bolt pattern. That's 5 lugs on a 114.3 mm (4.5″) pitch circle. Confirm against your door-jamb sticker before buying wheels.
Will wheels from another vehicle fit my Elantra?
Vehicles like the Acura Integra, Acura RDX, Acura TLX share the 5x114.3 pattern, so their wheels are worth checking — but the bolt pattern is only the first match. You still need a compatible center bore and offset, so confirm those before buying.
What does 5x114.3 mean in inches?
5x114.3 is the same as 5×4.5″ — 114.3 mm converts to 4.5 inches.
The Hyundai Elantra bolt pattern shown is a well-documented reference value. Confirm your exact bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying wheels. A shared bolt pattern does not by itself guarantee a wheel will fit.