Toyota Corolla: the short answer
The Toyota Corolla runs a 5×100 mm (5×3.94″) wheel bolt pattern — 5 studs on a 100 mm pitch circle. To swap wheels you need that same pattern plus a compatible center bore and offset.
Wheel fitment
Toyota Corolla bolt pattern
The Toyota Corolla bolt pattern is 5×100 mm (5×3.94″).
Toyota Corolla
5x1005 lugs · 100 mm · 3.94″ PCD
| Years | Bolt pattern | In inches |
|---|---|---|
| 2003–present (US sedan/hatch; the GR Corolla hot hatch uses 5x114.3) | 5x100 | 5×3.94″ |
Before you buy wheels
A matching bolt pattern is the first filter, not a green light. Check the hub center bore and the offset/backspacing, and make sure there's brake-caliper clearance. Confirm everything on the door-jamb sticker or manual.
Reference value for the Toyota Corolla; verify against your owner's manual.
FAQ
What is the Toyota Corolla bolt pattern?
The Toyota Corolla uses a 5×100 mm (5×3.94″) bolt pattern. That's 5 lugs on a 100 mm (3.94″) pitch circle. Confirm against your door-jamb sticker before buying wheels.
Will wheels from another vehicle fit my Corolla?
Vehicles like the Subaru BRZ, Subaru Crosstrek, Subaru Impreza share the 5x100 pattern, so their wheels are worth checking — but the bolt pattern is only the first match. You still need a compatible center bore and offset, so confirm those before buying.
What does 5x100 mean in inches?
5x100 is the same as 5×3.94″ — 100 mm converts to 3.94 inches.
The Toyota Corolla bolt pattern shown is a well-documented reference value. Confirm your exact bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying wheels. A shared bolt pattern does not by itself guarantee a wheel will fit.