Dodge Durango: the short answer
The Dodge Durango runs a 5×127 mm (5×5″) wheel bolt pattern — 5 studs on a 127 mm pitch circle. To swap wheels you need that same pattern plus a compatible center bore and offset.
Wheel fitment
Dodge Durango bolt pattern
The Dodge Durango bolt pattern is 5×127 mm (5×5″).
Dodge Durango
5x1275 lugs · 127 mm · 5″ PCD
| Years | Bolt pattern | In inches |
|---|---|---|
| 2011–present (WD) | 5x127 | 5×5″ |
Before you buy wheels
A matching bolt pattern is the first filter, not a green light. Check the hub center bore and the offset/backspacing, and make sure there's brake-caliper clearance. Confirm everything on the door-jamb sticker or manual.
Reference value for the Dodge Durango; verify against your owner's manual.
FAQ
What is the Dodge Durango bolt pattern?
The Dodge Durango uses a 5×127 mm (5×5″) bolt pattern. That's 5 lugs on a 127 mm (5″) pitch circle. Confirm against your door-jamb sticker before buying wheels.
Will wheels from another vehicle fit my Durango?
Vehicles like the Chrysler Pacifica, Jeep Gladiator, Jeep Grand Cherokee share the 5x127 pattern, so their wheels are worth checking — but the bolt pattern is only the first match. You still need a compatible center bore and offset, so confirm those before buying.
What does 5x127 mean in inches?
5x127 is the same as 5×5″ — 127 mm converts to 5 inches.
The Dodge Durango bolt pattern shown is a well-documented reference value. Confirm your exact bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying wheels. A shared bolt pattern does not by itself guarantee a wheel will fit.